Combo CNC Bar Pullers
Automate Any CNC Lathe

The Royal Combo CNC Bar Puller is both a bar puller and a cut-off tool in one unit. Benefits of this design include:  Saving a turret station by combining two tools into one.  Reduced cycle time because the turret does not need to index between the  cut-off and pulling operations.

The Royal Combo CNC Bar Puller is designed for use on all CNC lathes, and is very easy to setup and use.  Flexible heat-treated steel fingers provide strong grip force for pulling round, hex and square stock. Unit comes standard with serrated jaws and one blank spindle bushing. Order cut-off tool and insert separately.

Royal offers Kennametal tooling, but the Combo Bar Puller is compatible with all major brands of cut-off holders and inserts.

  • The Royal Combo CNC Bar Puller is both a bar puller and a cut-off tool in one unit. Benefits of this design include:
    • Saving a turret station.
    • Reduced cycle time because the turret does not need to index between the cut-off and pulling operations.
  • Very easy to setup and use.
  • Unit can pull round, square, and hex stock.
  • Compact design enables it to be used on most CNC lathes.
  • Each combo bar puller includes one set of standard jaws and one blank spindle bushing. Order cut-off insert and holder separately.
How it works:
Step 1 - Turn Step 2 - Cut-Off Step 3 - Stop Spindle/Grip Step 4 - Open Chuck/Pull
Save time and resources..
See it in action:

Cycle times are reduced because the turret does not need to index
between cut-off and pulling operations.
  • Royal Cut-off holder and insert can be purchased separately BELOW
  • Bar puller accepts many other popular brands of holders and inserts (See Compatabilty Chart below).
  • Cut-off holders from other manufacturers must be slightly modified before being used with bar puller.
Compatibility Chart

Order Below