Hardinge introduces the new 16C and 3J Indexing Systems. You like the 5C indexing concept but need to handle larger and heavier parts. Hardinge is revolutionizing the part positioning industry! Choose from three flexible systems and maximize your existing spindle tooling.
5C2
Rotary Indexer Systems - 10
arc-sec repeatability, ±25 arc-sec accuracy, max runout
.0002” (.005mm) TIR
- Hardinge 5C spindle with 4”/101.2mm centerline height to
base
- Streamlined casting and removable handle for increased
spindle clearance and better tool access
- 0.001 to 360 degrees-per-sec indexing speed
- High-load, tapered dual roller bearing spindle
- Manual collet closer is standard
- Single, dual, triple, quad and plate trunnion
configurations
- Uses standard 5C spindle tooling
The A2-5 spindle will accept collets, expanding
collets, step chucks, jaw chucks and slotted face plates
without the use of an adapter!
The robust dual-bearing spindle provides support for heavy
radial and axial loads with indexing speeds of up to
300-degrees per second. The motor can be mounted on the left
or the right. Pneumatic collet closer provides 4560-pound
(2068kg) of draw bar pull.
Hardinge's all-digital servo control box features multiple
lines of display with storage for up to 50 program with up
to 1000 steps in each! This servo is infrared
upload/download capable.
16C2
Rotary Table Indexers
- 6 arc-sec repeatability, ±15 arc-sec accuracy, max runout
.0002” (.005mm) TIR
- Hardinge A2-5 spindle nose with 6”/152.4mm centerline to
base
- Dual, Triple & Quad units
- with 7.87"/200mm centerline to base
- 0.001 to 300 degrees-per-second indexing speed
- Dual angular contact bearings
- Pneumatic through-hole collet closer
- Single, dual, triple and trunnion configurations
- Uses standard 16C spindle tooling
Call (800)423-5145 For Price Quote
Please bookmark, share or click the Google +1 Button if you found this page helpful!
