ROVI offers a variety of Craftsman Industries Inc. products designed for machining with Double Angle collets, including:

DA Collet Holders
Long 6.8" - 16" OAL | Short "Stubby" 3.6" - 6.2" OAL

 

#####

DOUBLE ANGLE COLLET CHUCK EXTENSIONS

s with all our collet chucks, the small diameter lock nut 

makes these ideal for machining hard-to-reach surfaces

For use on CNC Mills

   

TABLE OF DIMENSIONS

#####

 

Straight Shank Collet Chucks
Long DA (Double Angle) Collet Holders 6.8" - 16" OAL

Scroll Down To Order Online

Replacement Lock Nuts &
Open-end hex wrenches
are also available
(Part Numbers In Table Below)

Click here for Short "Stubby" 3.6" - 6.2" OAL

Useful on chuckers (manual or CNC), screw machines, and CNC lathes

  • Manufactured in USA from high grade, heat-treated alloy steel
  • Black Oxide finish for corrosion prevention
  • Comes equipped with inside back-up screw and Lock Nut
  • Tighten lock nut with a standard open-end wrench
    (no special wrench needed, unlike other brands)
  • Smaller diameter lock nut than most brands make
    these ideal for machining hard-to-reach surfaces.

TABLE OF DIMENSIONS
Chuck
Part
Number
D
Shank
Diameter
L
Overall
Length
L1
Lock Nut
Length
D1
Lock Nut
Diameter
Hex.
Wrench
Size
Max. Dia.
Thru
Shank
DA
Collet
Series
Chuck
Capacity
Wrench
Part
Number
Lock Nut
Part
Number
TE300-0500 ** 0.500 6.80 1.00 0.56 1/2" 1/4" DA300 1/64" - 1/4" W-0500 ENP-0500
TE300-0500S-8L 0.500 8 1.00 0.56 1/2" solid shank* DA300 1/64" - 1/4" W-0500 ENP-0500
TE300-0500S-9L 0.500 9 1.00 0.56 1/2" solid shank* DA300 1/64" - 1/4" W-0500 ENP-0500
TE300-0500S-10L 0.500 10 1.00 0.56 1/2" solid shank* DA300 1/64" - 1/4" W-0500 ENP-0500
TE200-0750 ** 0.750 7.10 1.34 0.81 11/16" 3/8" DA200 1/64" - 3/8" W-0687 ENP-0750
TE200-0750H-10L 0.750 10.5 1.34 0.81 11/16" 3/8" DA200 1/64" - 3/8" W-0687 ENP-0750
TE200-0750S-12L 0.750 12 1.34 0.81 11/16" solid shank* DA200 1/64" - 3/8" W-0687 ENP-0750
TE200-0750S-14L 0.750 14 1.34 0.81 11/16" solid shank* DA200 1/64" - 3/8" W-0687 ENP-0750
TE100-1000 ** 1.000 7.30 1.54 1.06 7/8" 9/16" DA100 1/64" - 9/16" W-0875 ENP-1000
TE100-1000H-9L 1.000 9.5 1.54 1.06 7/8" 9/16" DA100 1/64" - 9/16" W-0875 ENP-1000
TE100-1000S-10L 1.000 10.5 1.54 1.06 7/8" solid shank* DA100 1/64" - 9/16" W-0875 ENP-1000
TE100-1000S-12L 1.000 12 1.54 1.06 7/8" solid shank* DA100 1/64" - 9/16" W-0875 ENP-1000
TE100-1000S-14L 1.000 14 1.54 1.06 7/8" solid shank* DA100 1/64" - 9/16" W-0875 ENP-1000
TE100-1000S-16L 1.000 16 1.54 1.06 7/8" solid shank* DA100 1/64" - 9/16" W-0875 ENP-1000
TE180-1250 ** 1.250 7.30 1.54 1.43 1-1/4" 3/4" DA180 1/32" - 3/4" W-1250 ENP-1250
Click linked part numbers for images **
Solid Shank items have no thru-hole or backup screw *

All back-up screws have 1/8" hex. socket
Extra-long chucks (8"+) are limited supply. Please check availability before ordering
DO NOT OVER TIGHTEN LOCK NUT, ALWAYS USE BACKUP SCREW

 

Straight Shank Collet Chucks
Short "Stubby" DA (Double Angle) Collet Holders 3.5" - 6.2" OAL

Scroll Down To Order Online
Replacement Lock Nuts &
Open-end hex wrenches
are also available
(Part Numbers In Table Below)

Click Here For Long 6.8" - 16" OAL


For use on CNC Mills

  • Manufactured in USA from high grade, heat-treated alloy steel
  • Black Oxide finish for corrosion prevention
  • Comes equipped with inside back-up screw and Lock Nut
  • Tighten lock nut with a standard open-end wrench
    (no special wrench needed, unlike other brands)
  • Smaller diameter lock nut than most brands make
    these ideal for machining hard-to-reach surfaces.
  • Useful on chuckers (manual or CNC), screw machines, and CNC lathes
  • Shorter length lock nut than most other manufacturers' makes these great for automatic screw machines

TABLE OF DIMENSIONS
Chuck
Part
Number
D
Shank
Diameter
L
Overall
Length
L1
Lock Nut
Length
D1
Lock Nut
Diameter
Hex.
Wrench
Size
F
Flat
Width
Max. Dia.
Thru
Shank
DA
Collet 
Series
Chuck
Capacity
Wrench
Part
Number
Lock Nut
Part
Number
TS300-0500 0.500 3.60 0.70 0.56 1/2" 0.18 1/4" DA300 1/64" - 1/4" W-0500 SNP-0500
TS300-0625 0.625 3.75 0.70 0.56 1/2" 0.22 1/4" DA300 1/64" - 1/4" W-0500 SNP-0500
TS200-0625 0.625 3.75 0.71 0.75 11/16" 0.22 3/8" DA200 1/64" - 3/8" W-0687 SNP-0625
TS200-0750 0.750 3.80 0.71 0.81 3/4" 0.27 3/8" DA200 1/64" - 3/8" W-0750 SNP-0750
TS100-1000 1.000 4.00 0.90 1.06 7/8" 0.32 9/16" DA100 1/64" - 9/16" W-0875 SNP-1000
TS180-1000 1.000 6.20 0.87 1.56 1-3/8" NONE 3/4" DA180 1/32" - 3/4" W-1375 SNP-180
TS180-1250 1.250 6.20 0.87 1.56 1-3/8" 0.37 3/4" DA180 1/32" - 3/4" W-1375 SNP-180
TS180-1500 1.500 6.20 0.87 1.56 1-3/8" 0.40 3/4" DA180 1/32" - 3/4" W-1375 SNP-180
TS180-1750 1.750 6.20 0.87 1.56 1-3/8" 0.45 3/4" DA180 1/32" - 3/4" W-1375 SNP-180
Click part numbers for images

All back-up screws have 1/8" hex. socket
DO NOT OVER TIGHTEN LOCK NUT, ALWAYS USE BACKUP SCREW

.