BlackEye™ Coolant Nozzles

SCREW-LOCK COOLANT NOZZLE FOR CNC LATHES
  • An easy-to-aim replacement for screw-lock spherical coolant nozzles
  • Rated to 150 psi (10 bar) maximum
  • Sizes available to fit almost every machine or toolholder
  • Just install and tighten lock-screw once, then aim the stainless steel ball with the tip of your allen wrench
  • Choose tapped ball if you need to quickly plug the orifice (set screw included) or to use with Extension Tubes or Spray Tips
Nozzles replace these:
Part No. Nom. Dia. “D” Orifice Dia. “d” Pkg Qty
BE00112 10 mm 0.11 5
BE00212 10 mm M3.5 x .6 5
BE00107 12 mm 0.16 5
BE00222 12 mm M4 x .7 5
BE00108 14 mm 0.16 5
BE00232 14 mm M4 x .7 5
BE00109 15 mm 0.16 5
BE00242 15 mm M4 x .7 5
BE02020 18 mm 0.16 5
BE02032 18 mm M5 x .8 5
BE00110 22 mm 0.22 5
BE00252 22 mm M6 x 1.0 5
BE00120 3/8 inch 0.11 5
BE00262 3/8 inch M3.5 x .6 5
BE00111 1/2 inch 0.16 5
BE00272 1/2 inch M4 x .7 5
BE02010 5/8 inch 0.16 5
BE00282 5/8 inch M4 x .7 5
  • Material: Body - Acetal • Ball - Stainless Steel
  • Max Pressure: 150 PSI (10 bar)
  • Maximum Operating Temperature:160°F (70°C)

BlackEyes shown in boring bar holder

BlackEye installed on quick change turning tool.

Ordering: Measure the diameter of the original ball in your machine and order the nominal diameter to suit.

MANUFACTURER RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE OR OBLIGATION.