BrassBall™ Coolant Nozzles

SCREW-LOCK BRASS BALL COOLANT NOZZLES FOR CNC LATHES
  • Conventional brass ball nozzles available in a variety of orifice sizes and configurations
  • Tapped balls can be plugged with setscrew (included), or used with Spray Tips or Extension Tubes
DIMENSIONS IN INCHES (except as noted)
Hole Type Part No. Nom. Dia “D” Orifice Dia “d” Extension “L” Pkg Qty Configuration
The upper port on this boring bar holder uses an Angled Outlet Brass Ball, while the lower port employs a Tapped Hole Brass Ball fitted with a Bendable Extension Tube.

  • Material: Brass
  • Maximum Pressure: 500 psi (33 bar)
  • Maximum Operating Temperature: 300oF (150oC)
Drilled BB11004 10 mm 0.11 0 5
Drilled BB11007 10 mm 0.16 0 5
Drilled BB11014 11 mm 0.11 0 5
Drilled BB11015 11 mm 0.16 0 5
Drilled BB11024 12 mm 0.16 0 5
Drilled BB11027 12 mm 0.22 0 5
Drilled BB11037 14 mm 0.16 0 5
Drilled BB11040 14 mm 0.22 0 5
Drilled BB11049 15 mm 0.16 0 5
Drilled BB11052 15 mm 0.22 0 5
Drilled BB11057 18mm 0.16 0 5
Drilled BB11058 18mm 0.22 0 5
Drilled BB11071 22 mm 0.16 0 5
Drilled BB11074 22 mm 0.22 0 5
Drilled BB11083 1/2 inch 0.16 0 5
Drilled BB11086 1/2 inch 0.22 0 5
Drilled BB11107 5/8 inch 0.16 0 5
Drilled BB11110 5/8 inch 0.22 0 5
Tapped BB11001 10 mm M6x1.0 0 5
Tapped BB11016 11 mm M5x.8 0.24 5
Tapped BB11018 12 mm M5x.8 0.24 5
Tapped BB11031 14 mm M6x1.0 0.31 5
Tapped BB11043 15 mm M6x1.0 0.31 5
Tapped BB11059 18mm M6x1.0 0.31 5
Tapped BB11065 22 mm M6x1.0 0.31 5
Tapped BB11077 1/2 inch M5x.8 0.24 5
Tapped BB11101 5/8 inch M6x1.0 0.31 5
Angled Outlet BB11012 10 mm 0.11 0.25 5
Angled Outlet BB11017 11 mm 0.16 0.36 5
Angled Outlet BB11021 12 mm 0.16 0.36 5
Angled Outlet BB11034 14 mm 0.16 0.36 5
Angled Outlet BB11046 15 mm 0.16 0.36 5
Angled Outlet BB11060 18 mm 0.16 0.36 5
Angled Outlet BB11068 22 mm 0.16 0.36 5
Angled Outlet BB11080 1/2 inch 0.16 0.36 5
Angled Outlet BB11104 5/8 inch 0.16 0.36 5
Ordering: Measure the diameter of the original ball in your machine and order the nominal diameter to suit.

MANUFACTURER RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE OR OBLIGATION