JiffyJet™

PRESS-IN COOLANT NOZZLES
  • Just drill and ream a hole, press in a JiffyJet, and you’ve got an easily aimable coolant nozzle!
  • Ideal for special tooling, VDI holders, CNC lathe tooling, screw machines, etc.
  • Rated to 150 psi (10 bar) maximum
  • ±35° of adjustment either side of centerline
1: Drill coolant passage, leaving reaming allowance. 2: Ream hole to nominal size -0 +.002." 3: Press in JiffyJet until body is flush. Cutaway view showing JiffyJet installed.

DIMENSIONS IN INCHES (except as noted)

Part No. Nom. Dia. “D” A B Orifice Dia.“d” E(degrees) Prepared Hole Dia. Pkg Qty
  • Material:
    Ball: Stainless Steel - Body: Acetal
  • Maximum Pressure:
    150 PSI (10 bar)
  • Max Operating Temperature:
    160° F (70° C)

JJ07050 1/4 inch 0.190 0.05 0.08 35° .250/.2515 5
JJ00103 5/16 inch 0.250 0.06 0.11 35° .3125/.3145 5
JJ00104 3/8 inch 0.312 0.08 0.16 35° .375/.377 5
JJ00105 7/16 inch 0.360 0.10 0.16 35° .4375/.4395 5
JJ00106 9/16 inch 0.437 0.13 0.22 35° .5625/.5645 5
JJ00118 5/8 inch 0.437 0.13 0.22 35° .625/.627 5
JJ07160 6 mm 0.190 0.05 0.06 35° .2362/.2377 5
JJ07150 6 mm 0.190 0.05 0.08 35° .2362/.2377 5
JJ00119 8 mm 0.250 0.06 0.11 35° .315/.317 5
JJ00113 10 mm 0.312 0.08 0.16 35° .3937/.3957 5
JJ00114 12 mm 0.360 0.10 0.16 35° .4724/.4744 5
JJ00115 14 mm 0.437 0.13 0.22 35° .551/.553 5
JJ00116 15 mm 0.437 0.13 0.22 35° .5906/.5926 5
MANUFACTURER RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE OR OBLIGATION.