OddBall™

SCREW-LOCK BALLS THAT ADAPT YOUR FAVORITE HOSES AND NOZZLES TO FIT YOUR CNC LATHE
  • Allows Loc-Line*, Snap-Loc** and 1/8 NPT/BSPT fittings to be used on CNC lathes that employ screw-lock balls
  • Sizes available to fit almost every machine or toolholder
  • Choose acetal material for low pressures up to 150 psi (10 bar)
  • Choose brass material for higher pressures up to 500 psi (33 bar)
DIMENSIONS IN INCHES (except as noted)
Material Part No. Nom. Dia. “D” Adaptor Type Through hole Length “L” Pkg. Qty.
  • Maximum Pressure: Acetal: 150 PSI (10 bar) Brass: 500 PSI (33 bar)
  • Max Operating Temperature: Acetal: 160°F (70°C) Brass: 300°F (150°C)

TYPE 1 OddBall attached to 1/4" Loc-Line* hose.

TYPE 2 OddBall attached to 1/4" Snap-Loc** hose.

TYPE 3 OddBall threaded onto 1/8 NPT/BSPT TurretJet.
* LOC-LINE IS A TRADEMARK OF LOCKWOOD PRODUCTS INC.
** SNAP-LOC IS A TRADEMARK OF CEDARBURG INDUSTRIES
1/8 NPT/BSPT OB06501 10 mm 1 .25 dia. 0.63 5
OB06502 12 mm 1 .25 dia. 0.67 5
OB06504 12 mm 2 .25 dia. 0.76 5
OB06506 12 mm 4 .25 dia. 0.91 5
OB06508 14 mm 1 .25 dia. 0.76 5
OB06510 14 mm 2 .25 dia. 0.84 5
OB06512 14 mm 3 .25 dia. 0.38 5
OB06514 15 mm 1 .25 dia. 0.81 5
OB06516 15 mm 2 .25 dia. 0.89 5
OB06518 15 mm 3 .25 dia. 0.43 5
OB06526 22 mm 1 .25 dia. 1.12 5
OB06528 22 mm 2 .25 dia. 1.20 5
OB06530 22 mm 3 .25 dia. 0.74 5
OB06532 1/2 inch 1 .25 dia. 0.71 5
OB06534 1/2 inch 2 .25 dia. 0.79 5
OB06536 1/2 inch 4 .25 dia. 0.94 5
OB06538 5/8 inch 1 .25 dia. 0.87 5
OB06540 5/8 inch 2 .25 dia. 0.95 5
OB06542 5/8 inch 3 .25 dia. 0.47 5
1/8 NPT/BSPT OB06601 10mm 1 .25 dia. 0.64 5
OB06602 12mm 1 .25 dia. 0.67 5
OB06606 12mm 4 7/32 hex 0.90 5
OB06608 14mm 1 .25 dia. 0.77 5
OB06612 14mm 3 7/32 hex 0.39 5
OB06614 15mm 1 .25 dia. 0.81 5
OB06618 15mm 3 7/32 hex 0.45 5
OB06626 22mm 1 .25 dia. 1.15 5
OB06630 22mm 3 7/32 hex 0.77 5
OB06632 1/2 inch 1 .25 dia. 0.71 5
OB06636 1/2 inch 4 7/32 hex 0.94 5
OB06638 5/8 inch 1 .25 dia. 0.87 5
OB06642 5/8 inch 3 7/32 hex 0.49 5
† DO NOT EXCEED MAXIMUM PRESSURE RATING OF MATING HOSE SYSTEM
Ordering: Measure the diameter of the original ball in your machine and order the nominal diameter that suits your favorite nozzle system.

MANUFACTURER RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE OR OBLIGATION.