PlugJet™

SCREW-IN, FLUSH MOUNT COOLANT NOZZLE
  • Screws into an NPT or BSPT hole just like a flush plug
  • 35 degrees adjustment either side of centerline
  • Rated to 150 psi max
  • Ideal for machining applications where nozzle projections must be minimized
Simply insert the end of allen wrench (included) into the hole in the stainless ball until it engages the hex hole in the acetal body, then tighten the PlugJet into the tapped hole until the body is flush.
DIMENSIONS IN INCHES
Part No. Thread Size “E” A B(HEX) C Orifice Dia “d” F(degrees) Pkg Qty
PJ00510 1/8 NPT 0.50 9/64 0.12 0.16 0-35 5
PJ00520 1/8 BSPT 0.50 9/64 0.12 0.16 0-35 5
PJ00530 1/4 NPT/BSPT 0.62 9/64 0.15 0.16 0-40 5
PJ00540 3/8 NPT/BSPT 0.75 3/16 0.18 0.22 0-40 5
  • Material:
    Body - Acetal Ball - Stainless Steel
  • Maximum Operating Temperature:
    160°F (70°C)
  • Maximum Pressure:
    150 PSI (10 bar)
Ordering: Select Part No. & Input Quantity (5 per pkg.) below, hit Enter to Add To Cart
MANUFACTURER RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE OR OBLIGATION.