PrestoPort™

HIGH PRESSURE, PRESS-FIT, PORT ADAPTORS
  • Converts low pressure ScrewBall type ports to high pressure fixed, threaded ports

PROBLEM: Original equipment ScrewBall-type nozzles often can't reach the cutting tool, and can move out of position or blow out under high pressure

SOLUTION: PrestoPorts are easy to install and provide many options for routing high pressure coolant to the cutting tool (Shown here with Extension Tubes)
DIMENSIONS IN INCHES (except as noted)
Part No. Nominal Dia "D"* Thread "B" Length "A" C Pkg Oty Configuration
PP24086 8mm M6x1 6.0 0 5
PP24106 10mm M6x1 6.0 0 5
PP24126 12mm M6x1 6.0 0 5
PP24121 12mm 1/8 NPT/BSPT 6.0 0 5
PP24146 14mm M6x1 7.1 1.0 5
PP24141 14mm 1/8 NPT/BSPT 6.0 0 5
PP24156 15mm M6x1 7.1 1.0 5
PP24151 15mm 1/8 NPT/BSPT 6.0 0 5
PP24166 16mm M6x1 7.1 1.0 5
PP24161 16mm 1/8 NPT/BSPT 6.0 0 5
  • Material: Brass
  • Maximum Pressure: 1500 PSI (100 bar)
  • Maximum Operating Temperature: 300°F (150°C)
  • *Hole Tolerance: H9
Installation and Removal Tools
M6 Installation Tool
Part No. IT21225

Use to Install all M6
(Thread 'B) PrestoPorts
NPT/BSPT Installation Tool
Part No. IT21230

Use to install all1/8 NPT/BSPT
(Thread 'B) PrestoPorts
Slide Hammer Kit
Part No. SH21306

Use to remove PrestoPorts and
original equipment nozzles.
Includes adaptors to fit M3.5, M4,
M5, M6 and 1/8 NPT/BSPT
MANUFACTURER RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE OR OBLIGATION.