Home Products Company Overview VIEW CART PDF Downloads Contact Us What's New At ROVI
Search ROVI Products..
Interchangeable CNC Lathe Bar Pull Grippers
ROVI has made it easy to Order Interchangeable Bar Puller Kits & Parts Online
What does the bar puller do?

Rovi Distributes high quality lathe bar pullers and bar puller kits to enhance bar stock puller applications. These bar pullers are most frequently used as a CNC bar puller, but are also used in 'pick and place' applications. Bar Pullers are available for ID & OD stations on turret.

Grippers for CNC lathes are available from 1/8" to 2" diameters (1/16" increments) as well as 2 1/4" & 2 1/2" sizes and mount directly to the bar pull shank or bar pull adapters.

Features and benefits

  • Bar pull shanks fit in most boring tool holders
  • Low cost bar pull gripper replacements
  • Pull bar to last usable part length
  • Pull positions bar +/- 0.001"
  • Works close to chuck or collet nose
  • Does not interfere with adjacent tools or turret movement
  • Only 1/4" bar engagement required
  • Made in the U.S.A. by Dunham
See the CNC Bar Puller in Action..
Demonstration video of the bar puller in a Haas SL-10. With limited room for a bar feeder, the bar puller is used here to automate production. It's shown pulling a 4 foot long 1 inch diameter stainless steel bar. The bar is supported in the draw tube by a spindle liner made from PVC pipe.
More Info & Online Ordering..

Universal CNC Lathe Bar Pullers
ROVI has made it easy to Order Universal CNC Lathe Bar Pullers & Replacement Parts Online

Adjustible Grip CNC bar pullers can be used to easily automate any CNC lathe or turning center. Bar pullers improve productivity by enabling CNC lathes to run unattended, freeing up operators to handle other tasks. CNC bar pullers are inexpensive, require minimal setup, and can be easily fit to any CNC lathe.

Universal bar pullers have a number of advantages over bar feeders:
  • Bar pullers are much less expensive. The average cost of a universal bar puller is $600, compared to $10,000 - $30,000 for a bar feeder.
  • Universal bar pullers are easier to setup and use — no electrical interface with the machine tool control is required.
  • Bar pullers don’t waste valuable floor space.
  • Bar pullers can be easily moved from machine to machine as jobs require.
  • Universal bar pullers offer maintenance-free operation.
  • Made in the U.S.A. by Royal.

See the CNC Combo Bar Puller in Action..
For Details, Specs & Online Ordering, Click Bar Puller Type Below..

Compact CNC Bar Pullers

Heavy-Duty CNC Bar Pullers

Combo CNC Bar Pullers


Please bookmark, share or click the Google +1 Button if you found this page helpful!
Browse All ROVI Machine Tool Products

Top Sellers:
Chuck Jaws | Collets, Clamps & Mandrels - ID Expanding | Collets OD | Coolant Nozzles | Specialty Tooling & Machines

6 Inch Magnum Vice | The ACCU-TAPPER Portable Tapping Machine | Adjustable Floating Drill Holders | Air Collet Chucks | Bar Pullers
Chucks - Power and Manual | Chuck Jaws | Collet Accessories | Collet Chucks | Collet Closer 5C - Lever Actuated
Collets - Expanding 5C, 16C & 3J | Collets - ER (Standard) | Collet Fixtures | Coolant Nozzles | Filtermist Mist Collectors
HARDINGE 5C, 16C & 3J Indexers | Kwik Tilt sine & tilt table | Mandrels - Expanding | Pierson Pallet Retention System | Safety Screens
Set-Up Tooling | Scientific Cutting Tools | Spindle Work Stop | Stop-Loc | Tool Blocks | Tool Holder Bushings & Boring Bar Sleeves
VDI Tool Holders | Vise Jaws ’Purple’ | Vise Stop | Zero Point Clamping Systems

Home | Products | Company Overview | VIEW CART | PDF Downloads | Contact Us | Terms & Conditions

e-Commerce and Shopping Cart Integration by Oliver Madly Copyright ©2002-2015 ROVI Products, Inc. All rights reserved.
CALL- (800) 423-5145
Indutrial Photography by Glenn Gordon