Product Description
Coolant Nozzle For Vertical & Horizontal Machining Centers
- Adjusts from full shutoff to fine fan spray to direct stream
- Aimable from zero to 90° with 360° sweep
- Stays put (doesn’t vibrate out of place)
- No interference problems with clamps, fixtures or swarf
- Fits NPT and BSPT threads
- Rated to 100 psi (6.7 bar) maximum
MillJets shown in use at various angles and spray widths.
| Part No. | Thread Size “E” | B | C | D (Degrees) | A | F | Pkg Qty |
| MJ03010 | 1/8 NPT/BSPT | 1.50 | 1.70 | 0-90 | 0.44 | 0.625 | 2 |
| MJ00117 | 1/4 NPT/BSPT | 1.50 | 1.70 | 0-90 | 0.44 | 0.625 | 2 |
– Recommended coolant filtration – 100 microns –
- Material: Acetal
- Maximum Pressure: 100 PSI (6.7 bar)
- Max Operating Temperature: 160°F (70°C)
MillJets shown installed on Vertical Machining
Center showing wide and narrow spray.
Add To Cart
Scoll Down For Product Description
MillJet™ Adjustable Spray Coolant Nozzle
$74.03
Product Images
