An expanding tool that fits into a lathe spindle or draw tube for quick setup when accuracy or consistency of linear dimensions is necessary. Place work piece in chuck or collet and set proper length. Insert work stop into rear of spindle or draw tube. Expand fingers until they touch spindle; then back off screw quarter turn. Using T wrench, slide work stop into spindle until it contacts with work piece. Tighten work stop and remove wrench.
| RANGE |
PART NUMBER |
PRICE |
| 3/4" -
7/8" |
44000 |
$185.00 |
| 1"
- 1-1/8" |
44001 |
$145.00 |
| 1-1/8"- 1-1/4" |
44002 |
$145.00 |
| 1-1/4" - 1-3/8" |
44003 |
$145.00 |
| 1-3/8" - 1-1/2" |
44004 |
$145.00 |
| 1-1/2" - 1-5/8" |
44005 |
$165.00 |
| 1-5/8" - 1-3/4" |
44006 |
$165.00 |
| 1-3/4" - 1-7/8" |
44007 |
$165.00 |
| 1-7/8" - 2" |
44008 |
$185.00 |
| 2"
- 2-1/8" |
44009 |
$185.00 |
| 2-1/8 - 2-1/4" |
44010 |
$185.00 |
| 2-1/4" - 2-3/8" |
44011 |
$185.00 |
| 2-3/8" - 2-1/2" |
44012 |
$185.00 |
| 2-1/2" - 2-5/8" |
44013 |
$210.00 |
| 2-5/8 - 2-3/4" |
44014 |
$210.00 |
| 2-3/4" - 2-7/8" |
44015 |
$210.00 |
| 2-7/8" - 3" |
44016 |
$210.00 |
| 3"- -
3-1/8" |
44017 |
$255.00 |
| 3-1/8" - 3-1/4" |
44018 |
$255.00 |
| 3-1/4" - 3-3/8" |
44019 |
$255.00 |
| 3-3/8 - 3-1/2" |
44020 |
$255.00 |
| 3-1/2" - 3-5/8" |
44021 |
$300.00 |
|
 |
| Place work piece in chuck or collet and set
proper length. |
 |
| Insert work stop into rear of spindle or draw tube. Expand fingers until they touch spindle; then back off screw quarter turn. |
 |
| Using "T" wrench, slide work stop into spindle until it contacts with work piece. Tighten work stop and remove wrench. |
|
