The Royal Combo CNC Bar Puller is both a bar puller and a cut-off tool in one unit. Benefits of this design include:
- Saving a turret station by combining two tools into one.
- Reduced cycle time because the turret does not need to index between the cut-off and pulling operations.
The Royal Combo CNC Bar Puller is designed for use on all CNC lathes, and is very easy to set up and use. Flexible heat-treated steel fingers provide strong grip force for pulling round, hex and square stock. Unit comes standard with serrated jaws and one blank spindle bushing. Order cut-off tool and insert separately.
Royal offers Kennametal tooling, but the Combo Bar Puller is compatible with all major brands of cut-off holders and inserts.
- The Royal Combo CNC Bar Puller is both a bar puller and a cut-off tool in one unit. Benefits of this design include:
- Saving a turret station.
- Reduced cycle time because the turret does not need to index between the cut-off and pulling operations.
- Very easy to setup and use.
- Unit can pull round, square, and hex stock.
- Compact design enables it to be used on most CNC lathes.
- Each combo bar puller includes one set of standard jaws and one blank spindle bushing. Order cut-off insert and holder separately.
How it works:
-
- Step 1 – Turn
-
- Step 2 – Cut-Off
-
- Step 3 – Stop Spindle/Grip
-
- Step 4 – Open Chuck/Pull
See it in action:
Cycle times are reduced because the turret does not need to index
between cut-off and pulling operations.
- Royal Cut-off holder and insert can be purchased separately below
- Bar puller accepts many other popular brands of holders and inserts (See Compatibility Chart below).
- Cut-off holders from other manufacturers must be slightly modified before being used with bar puller.
Compatibility Chart
Select Product Below to Order
Showing all 4 results
