Long DA (Double Angle) Collet Holders

Product Description

pchgroup

Part includes Lock Nut & Back-Up Screw (where applicable).

Straight Shank Collet Chucks
Long DA (Double Angle) Collet Holders 6.8″ – 16″ OAL

Replacement Lock Nuts &
Open-end hex wrenches
are also available
(Part Numbers In Table Below)

Useful on chuckers (manual or CNC), screw machines, and CNC lathes

Short ER Collet Holders
  • Manufactured in USA from high grade, heat-treated alloy steel
  • Black Oxide finish for corrosion prevention
  • Comes equipped with inside back-up screw and Lock Nut
  • Tighten lock nut with a standard open-end wrench (no special wrench needed, unlike other brands)
  • Smaller diameter lock nut than most brands make these ideal for machining hard-to-reach surfaces.

Table Of Dimensions

Chuck
Part
Number
D
Shank
Diameter
L
Overall
Length
L1
Lock Nut
Length
D1
Lock Nut
Diameter
Hex.
Wrench
Size
Max. Dia.
Thru
Shank
DA
Collet
Series
Chuck
Capacity
Wrench
Part
Number
Lock Nut
Part
Number
TE300-0500 **0.5006.801.000.561/2″1/4″DA3001/64″ – 1/4″W-0500ENP-0500
TE300-0500S-8L0.50081.000.561/2″solid shank*DA3001/64″ – 1/4″W-0500ENP-0500
TE300-0500S-9L0.50091.000.561/2″solid shank*DA3001/64″ – 1/4″W-0500ENP-0500
TE300-0500S-10L0.500101.000.561/2″solid shank*DA3001/64″ – 1/4″W-0500ENP-0500
TE200-0750 **0.7507.101.340.8111/16″3/8″DA2001/64″ – 3/8″W-0687ENP-0750
TE200-0750S-10L0.75010.51.340.8111/16″solid shank*DA2001/64″ – 3/8″W-0687ENP-0750
TE200-0750S-12L0.750121.340.8111/16″solid shank*DA2001/64″ – 3/8″W-0687ENP-0750
TE200-0750S-14L0.750141.340.8111/16″solid shank*DA2001/64″ – 3/8″W-0687ENP-0750
TE100-1000 **1.0007.301.541.067/8″9/16″DA1001/64″ – 9/16″W-0875ENP-1000
TE100-1000S-10L1.00010.51.541.067/8″solid shank*DA1001/64″ – 9/16″W-0875ENP-1000
TE100-1000S-12L1.000121.541.067/8″solid shank*DA1001/64″ – 9/16″W-0875ENP-1000
TE100-1000S-14L1.000141.541.067/8″solid shank*DA1001/64″ – 9/16″W-0875ENP-1000
TE100-1000S-16L1.000161.541.067/8″solid shank*DA1001/64″ – 9/16″W-0875ENP-1000
TE180-1250 **1.2507.301.541.431-1/4″3/4″DA1801/32″ – 3/4″W-1250ENP-1250

telinediag** Image in product gallery to the right
* Solid Shank items have no thru-hole or backup screw

All back-up screws have 1/8″ hex. socket
Extra-long chucks (8″+) are limited supply. Please check availability before ordering
DO NOT OVER TIGHTEN LOCK NUT, ALWAYS USE BACKUP SCREW

Add To Cart

Scoll Down For Product Description

Long DA (Double Angle) Collet Holders

$83.00$230.00

Product Images

Shopping Cart
Scroll to Top