Product Description

Part includes Lock Nut & Back-Up Screw (where applicable).

pchgroup

Straight Shank Collet Chucks
Long DA (Double Angle) Collet Holders 6.8″ – 16″ OAL

Replacement Lock Nuts &
Open-end hex wrenches
are also available
(Part Numbers In Table Below)

Short ER Collet Holders

Useful on chuckers (manual or CNC), screw machines, and CNC lathes

  • Manufactured in USA from high grade, heat-treated alloy steel
  • Black Oxide finish for corrosion prevention
  • Comes equipped with inside back-up screw and Lock Nut
  • Tighten lock nut with a standard open-end wrench
    (no special wrench needed, unlike other brands)
  • Smaller diameter lock nut than most brands make
    these ideal for machining hard-to-reach surfaces.

Rovi

Table Of Dimensions

Chuck
Part
Number
D
Shank
Diameter
L
Overall
Length
L1
Lock Nut
Length
D1
Lock Nut
Diameter
Hex.
Wrench
Size
Max. Dia.
Thru
Shank
DA
Collet
Series
Chuck
Capacity
Wrench
Part
Number
Lock Nut
Part
Number
TE300-0500 **0.5006.801.000.561/2″1/4″DA3001/64″ – 1/4″W-0500ENP-0500
TE300-0500S-8L0.50081.000.561/2″solid shank*DA3001/64″ – 1/4″W-0500ENP-0500
TE300-0500S-9L0.50091.000.561/2″solid shank*DA3001/64″ – 1/4″W-0500ENP-0500
TE300-0500S-10L0.500101.000.561/2″solid shank*DA3001/64″ – 1/4″W-0500ENP-0500
TE200-0750 **0.7507.101.340.8111/16″3/8″DA2001/64″ – 3/8″W-0687ENP-0750
TE200-0750H-10L0.75010.51.340.8111/16″3/8″DA2001/64″ – 3/8″W-0687ENP-0750
TE200-0750S-12L0.750121.340.8111/16″solid shank*DA2001/64″ – 3/8″W-0687ENP-0750
TE200-0750S-14L0.750141.340.8111/16″solid shank*DA2001/64″ – 3/8″W-0687ENP-0750
TE100-1000 **1.0007.301.541.067/8″9/16″DA1001/64″ – 9/16″W-0875ENP-1000
TE100-1000H-9L1.0009.51.541.067/8″9/16″DA1001/64″ – 9/16″W-0875ENP-1000
TE100-1000S-10L1.00010.51.541.067/8″solid shank*DA1001/64″ – 9/16″W-0875ENP-1000
TE100-1000S-12L1.000121.541.067/8″solid shank*DA1001/64″ – 9/16″W-0875ENP-1000
TE100-1000S-14L1.000141.541.067/8″solid shank*DA1001/64″ – 9/16″W-0875ENP-1000
TE100-1000S-16L1.000161.541.067/8″solid shank*DA1001/64″ – 9/16″W-0875ENP-1000
TE180-1250 **1.2507.301.541.431-1/4″3/4″DA1801/32″ – 3/4″W-1250ENP-1250

** Image in product gallery to the right
* Solid Shank items have no thru-hole or backup screw

All back-up screws have 1/8″ hex. socket
Extra-long chucks (8″+) are limited supply. Please check availability before ordering
DO NOT OVER TIGHTEN LOCK NUT, ALWAYS USE BACKUP SCREW

telinediag

Add To Cart

$71.00$195.00

Clear

Product Images

Move your mouse over image for zoom or click to see larger view.