Screw-In, Brass Spray Tips For Use In Tapped-Ball Nozzles

  • Available in various orifice diameters
  • Ideal for concentrating the coolant stream at the cutting edge
  • Angled outlet SprayTips enable aiming outside a nozzle’s normal range of motion

SprayTips can be used in a wide variety of nozzles including; ScrewBalls, JetBolts, BrassBalls, BlackEyes, TurretJets, JetTubes, SweatJets, CapJets & BugEyes.

  • Material: Brass
  • Maximum Pressure: 500 psi (33 bar)
  • Maximum Operating Temperature: 300°F (150°C)

DIMENSIONS IN INCHES (except as noted)

Type Part No. Thread “E” Orifice Dia. “d” L A “C” Hex Pkg Qty Configuration
ST16510 M3.5 x .6 0.062 0.42 0.14 3/16 5
ST16515 M3.5 x .6 0.086 0.42 0.14 3/16 5
ST16520 M4 x .7 0.062 0.54 0.18 3/16 5
ST16525 M4 x .7 0.086 0.54 0.18 3/16 5
ST16530 M5 x .8 0.062 0.63 0.21 1/4 5
ST16535 M5 x .8 0.086 0.63 0.21 1/4 5
ST16540 M5 x .8 0.117 0.63 0.21 1/4 5
ST16545 M6 x 1.0 0.062 0.63 0.21 1/4 5
ST16550 M6 x 1.0 0.086 0.63 0.21 1/4 5
ST16555 M6 x 1.0 0.117 0.63 0.21 1/4 5
ST16560 M6 x 1.0 0.150 0.63 0.21 1/4 5
ST16565 M8 x 1.25 0.062 0.80 0.30 3/8 5
ST16570 M8 x 1.25 0.086 0.80 0.30 3/8 5
ST16575 M8 x 1.25 0.117 0.80 0.30 3/8 5
ST16580 M8 x 1.25 0.160 0.80 0.30 3/8 5
ST16585 M8 x 1.25 0.220 0.80 0.30 3/8 5
ST16610 1/8NPT/BSPT 0.062 0.90 0.37 1/2 5
ST16615 1/8NPT/BSPT 0.086 0.90 0.37 1/2 5
ST16620 1/8NPT/BSPT 0.117 0.90 0.37 1/2 5
ST16625 1/8NPT/BSPT 0.160 0.90 0.37 1/2 5
ST16630 1/8NPT/BSPT 0.220 0.90 0.37 1/2 5
ST16635 1/8NPT/BSPT 0.280 0.90 0.37 1/2 5
ST16650 M3.5 x .6 0.062 0.32 0.14 3/16 5
ST16655 M4 x .7 0.062 0.36 0.18 3/16 5
ST16660 M5 x .8 0.086 0.42 0.21 1/4 5
ST16665 M6 x 1.0 0.086 0.42 0.21 1/4 5
ST16670 M6 x 1.0 0.117 0.42 0.21 1/4 5

Select desired product from links below.

Showing all 2 results

Spray Tips ANGLED for Tapped Coolant Nozzles

Spray Tips ANGLED (for Tapped Coolant Nozzles)

$60.62
Spray Tips Straight for Tapped Coolant Nozzles Online Ordering

Spray Tips STRAIGHT (for Tapped Coolant Nozzles)

$36.83$43.38