Product Description

Set-up in only a few minutes.

Kwik Tilt has come up with an easy and simple way to set up a tilt or sine table using a standard 6″ vise. Simply determine the angle you want with the provided dowel pins, and set the Kwik Tilt into the vise. Clamp the vise jaws onto Kwik Tilt. If your vise is aligned, so is the Kwik Tilt. Remove the Kwik Tilt from the vise when the job is finished. Now you are ready for your next set-up. Increase your profits while saving time and money using the Kwik Tilt. It’s that Kwik and Easy!

Exploded view pins

From 0° to any angle in minutes, not hours!

KWIK TILT Kit Includess:

  • KWIK TILT One Piece Sine & Tilt Fixture.
  • Set of four (4) .5000″ Pins for the Correspondent Holes.
  • Set of ten (10) Kwik Pin-Gages for increments of 1, 2, 3, 4 and 5 degrees.
  • Sturdy Case.

Save Money on Every Set Up with this Easy To Adjust Sine and Tilt Table!


  • Use the Vise you already have on the machine, no need to clear and clean the machine table or remove existing set ups, no need to tilt the spindle.
  • If the Vise in the machine is aligned so is the KWIK TILT.
  • When the job is done, remove the KWIK TILT from the Vise and your Vise is ready for the next Job, KWIK AND SIMPLE Save Hours and Money.



  • Hard anodized 6061-T6 Aluminum alloy.
  • Precise machined and ground surfaces.
  • Working area is 5.0-4.8″ x 10.0-9.8″ that has horizontal & vertical machined 5/8″ T-Slots.
  • Angularity +30 seconds from the jaw plane.
  • Squareness and Parallelism within .0008″

Seller warrants that the product manufactured by KWIK TILT LLC shall be free from defects in workmanship and material for a period of six (6) months from the date of shipment.
Should any failure to conform to this warranty arise within said period, Seller shall, upon prompt notification thereof and provided that the product has been stored and handled in accordance with good industry practice and with any specific Seller recommendations, correct such nonconformity by furnishing a replacement product, F.O.B. shipment point, or, at its option, by reworking the defective product. Defects caused by tampering, alterations or repairs are not covered by this warranty.
This warranty does not apply to any product which has been subject to abuse, misuse, negligence or accident, nor does it apply to any tool, fixture or device that was/is mounted to the product.
Correction of nonconformities, whether patent or latent, in the manner and within the time provided above shall constitute the entire liability of Seller with respect to such product whether in contract, warranty, tort, strict liability, or otherwise.
Except for the warranty of title, the foregoing warranties are exclusive and in lieu of all other warranties, whether written, or implied, in fact, or in law (including any warranty of merchantability or fitness for purpose).

Add To Cart



Product Images

Move your mouse over image for zoom or click to see larger view.