Product Description
Tool Block Features
- Bolt On Tool Blocks (Lathe Mounting Blocks & Block Tool Holders) for all types of Machines; New or Old.
- Block Tool Holders have a specific Bolt Hole Pattern unique to each Machine Make and Model.
- Select Block Tool Holders from list below. If you do not see your Machine Listed contact us at 800-423-5145. We sell Blocks for Every Machine.
- Made From Alloy Steel; Precision Machined and Ground. High Pressure Coolant Nozzles.
- Components Included: Wedges, Coolant Nozzles and Set Screws.
- Internal Coolant Option available for all ID Tool Blocks; add “INT” to the Part Number.
- Made in the USA.
New Items
- VDI ID Block Tool Holders; convert your standard Bolt On Block Lathe to a VDI Turret.
- ER 32 Collet ID Tool Blocks; offered in Standard Style and Recessed Style (Shown Below).
- Need to Hold a Very Long Bar; we can make any ID Tool Block “Extended Style” – Increase your Gripping Power!
- More ID Sizes Available – We make a variety of ID sizes Standard for All Blocks – Call for Listing & Prices!
Click on any section below for more information:
VDI ID
ER ID
ID
OD Type II
OD Type I
| Bolt Hole Pattern: 80mm x 45mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Cadet, Captain 370, ESL8, ESL10, Heritage LB-15, LB15IIM, LB250T, LU25, LU15, Crown LB25, CAP470, L1420, LB4000EXBB/1500, L470, Genos250-V8, LB3000**, LU4000** | A118-8420 DBL | 0.75″ | 1.25″ | A118-8311 1″ Sq. | A118-8411 1″ Sq. |
| A118-8425 | 1″ | 1.25″ | |||
| A118-8432 | 1.25″ | 1.25″ | |||
| A118-8435 | 1.50″ | 1.25″ | |||
| A118-8436 | 2″ | 1.35″ | |||
| A118-8437 | 2.5″ | 1.625″ | |||
| **A118-8636X60CL | 2″ | 60mm | |||
| Bolt Hole Pattern: 85mm x 70mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| LB35, LU35 | LB35-8435 | 1.5″ | 1.375″ | LB35-8311 1″ Sq. | LB35-8411 1″ Sq. |
| LB35-8436 | 2″ | 1.375″ | |||
| LB35-8437 | 2.5″ | 1.625″ | |||
| Bolt Hole Pattern: 105mm x 70mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| LB45, LU45 | LB45-8435 | 1.5″ | 1.625″ | LB45-8311B 1.25″ Sq. | LB45-8411B 1.25 Sq. |
| LB45-8436 | 2″ | 1.625″ | |||
| LB45-8437 | 2.5″ | 1.625″ | |||
| LB45-8475 | 3″ | ||||
| LB45Wide-8437 Split | 2.5″ | 40mm | |||
| Bolt Hole Pattern: 73mm x 65mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| LB2000, LB2500, LB3000, LB3000EX | LB3000-8416 | 0.625″ | 90mm | LB3000-8311 1″ Sq. | LB3000-8411 1″ Sq. |
| LB3000-8420 | 0.75″ | 90mm | LB3000-8311 DBL 1″ Sq. | ||
| LB3000-8425 | 1″ | 90mm | |||
| LB3000-8432 | 1.25″ | 90mm | |||
| LB3000-8435 | 1.5″ | 90mm | |||
| LB3000-8436 | 2″ | 90mm | |||
| Bolt Hole Pattern: 80mm x 78mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| LB4000, LB4000EX | LB4000-8432 | 1.25″ | 90mm | LB4000-8311 1″ Sq. | LB4000-8411 1″ Sq. |
| LB4000-8435 | 1.5″ | 90mm | LB4000-8311 DBL 1″ Sq. | ||
| LB4000-8436 | 2″ | 90mm | |||
| LB4000-8437 | 2.5″ | 90mm | |||
| Bolt Hole Pattern: 70mm x 45mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| LB-9, LB-10, GenosL250V12, ESL6 Heritage | LB9-8420 | 0.75″ | 1″ | LB9-8311A .75″ Sq. | LB9-8411A .75 Sq. |
| LB9-8425 | 1″ | 1″ | |||
| LB9-8432 | 1.25″ | 1″ | |||
| LB9-8435 | 1.5″ | 1″ | |||
| Bolt Hole Pattern: 80mm x 45mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| LC20 | LC20-8432 | 1.25″ | 1.25″ | LC20-8311 1″ Sq. | LC20-8411 1″ Sq. |
| LC20-8435 | 1.5″ | 1.25″ | |||
| LC20-8436 | 2″ | 1.25″ | |||
| Bolt Hole Pattern: 85mm x 70mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| LC30 | LC30-8436 | 2″ | 1.625″ | LC30-8311/8411Combo OD Holder 1″ Sq. | |
| Bolt Hole Pattern: 105mm x 70mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| LC40 | LC40-8436 | 2″ | 1.625″ | LC40-8311B 1.25″ Sq. | LC40-8411B 1.25″ Sq. |
| LC40-8437 | 2.5″ | 1.625″ | |||
| Bolt Hole Pattern: 80mm x 120mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| LC50 | LC50-8437 | 2.5″ | 1.75″ | LC50-8311B 1.25″ Sq | LC50-8411B 1.25″ Sq |
| LC50-8475 | 3″ | 2″ | |||
| Bolt Hole Pattern: 160mm x 120mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| LFS12 | LFS12-8432 | 1.25″ | 115mm | LFS12-8311 1″ Sq. | LFS12-8411 1″ Sq. |
Rovi
ID
FACING
TURNING
| Bolt Hole Pattern: 64mm x 30mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| CL15, CL20, SL135, SL150, SL154, ZL15 | MSL150-8432 | 1.250″ | 35mm | MSL150-8311A .75″ Sq. | MSL150-8411A .75″ Sq. |
| MSL150-8435 | 1.5″ | 35mm | |||
| MSL150-8436 | 2″ | 35mm | |||
| MSL150-8420DBL | 0.750″ | 30mm,70mm Double |
|||
| Bolt Hole Pattern: 76mm x 35mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| CL25, CL200, CL253, CL2000, DT1500, DT1530, DT2550, SL200, SL203, SL204, SL250, SL253, SL300, SL303,, VL25A1, ZL25, ZL200, ZL250, ZT2500, Duraturn 2050,, SL20, SL25, SL30, SL2500, NLX2500, Frontier | MSL20-8425 | 1″ | 40mm | MSL20-8311 1″ Sq. | MSL20-8411 1″ Sq. |
| MSL20-8432 | 1.25″ | 40mm | MSL20-8311 DBL 1″ Sq. | ||
| MSL20-8435 | 1.5″ | 40mm | |||
| MSL20-8445 | 1.75″ | 40mm | |||
| MSL20-8436 | 2″ | 40mm | |||
| Bolt Hole Pattern: 88mm x 63mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| SL35, TL40-10ST, ZL35, Samsung | MSL35-8435 | 1.5″ | 40mm | MSL35-8311 1″ Sq. | MSL35-8411 1″ Sq. |
| MSL35-8436 | 2″ | 40mm | |||
| MSL35-8437 | 2.5″ | 50mm | |||
| Bolt Hole Pattern: 102mm x 80mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| SL45, SL400, SL403, SL405, VL55, ZL45 | MSL403-8436 | 2″ | 50mm | MSL403-8311B 1.25″ Sq. | MSL403-8411B 1.25″ Sq. |
| MSL403-8437 | 2.5″ | 50mm | |||
| MSL403-8475 | 3″ | 50mm | |||
| Bolt Hole Pattern: 115mm x 110mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| SL6, SL65, SL600, SL603, MSL75 | MSL603-8437 | 2.5″ | 60mm | MSL603-8311B 1.25″ Sq. | MSL603-8411B 1.25″ Sq. |
| MSL603-8475 | 3″ | 60mm | MSL603-8311 1″ Sq. | ||
| MSL603-84100 | 4″ | ||||
| Bolt Hole Pattern: 124mm x 95mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| SL630MC | MSL603MC-8437 Split | 2.5″ | 2.5″ | ||
| Bolt Hole Pattern: 70mm x 62mm Machine Model |
Part Number † Ext. Coolant Only |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| NT3100 DCG, NT3150 DCG, NT3200 DCG, NZ1500, NZ2000, NZ3000, DURA 2050MC | † NZ2000-8425DBL | 1″ | 75mm, 105mm Double |
NZ2000-8311A .75″ Sq. | NZ2000-8411 1″ Sq. |
| † NZ2000-8432 | 1.25″ | 100mm | NZ2000-8311 1″ Sq. | ||
| † NZ2000-8435 | 1.5″ | 100mm | |||
| Bolt Hole Pattern: 94mm x 84mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| NL1500, NL2000, NL2500, NL3000, NT4200, NT4250, NLX2500, Feeler, NT4300 | NL3000-8432DBL | 1.25″ | 80mm, 120mm Double |
NL3000-8311 1″ Sq. | NL3000-8411 1″ Sq. |
| NL3000-8435 | 1.5″ | 80mm | NL3000-8311 DBL 1″ Sq. | ||
| NL3000-8436 | 2″ | 80mm | |||
| NL3000-8437 | 2.5″ | 80mm | |||
| NL3000-8475 | 3″ | 80mm |
Rovi
ID
FACING
TURNING
| Bolt Hole Pattern: 64mm x 50mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| ST20, DS30, ST30SS | HST20-8420 | 0.75″ | 40mm | HST20-8311A .75″ Sq. | HST20-8411A .75″ Sq. |
| HST20-8425 | 1″ | 40mm | |||
| HST20-8432 | 1.25″ | 40mm | |||
| HST20-8435 | 1.5″ | 40mm | |||
| HST20-8436 | 2″ | 40mm | |||
| Bolt Hole Pattern: 70mm X 45mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| SL-10, ST10, HT10 | HSL10-8420 | 0.75″ | 1″ | HSL10-8311A .75″ Sq. | HSL10-8411A .75″ Sq. |
| HSL10-8425 | 1″ | 1″ | |||
| HSL10-8432 | 1.25″ | 1″ | |||
| HSL10-8435 | 1.5″ | 1″ | |||
| Bolt Hole Pattern: 73mm X 70mm Machine Model |
I.D Block : Part # |
OD Turning Block : Part # |
|||
| BMT65 | H-BMT65-8425 INT: 1”ID | H-BMT65-8311: 1″ OD | |||
| H-BMT65-8435 INT: 1.5” ID | H-BMT65-8311M: 25mm OD | ||||
| H-BMT65-8425M INT: 25mm ID | H-BMT65-8311M: 25mm OD | ||||
| H-BMT65-8435M INT: 40mm ID Bushing: 8613CNL | H-BMT65-8311 DBL: 1″ Dbl. OD | ||||
| H-BMT65-8425 Split: 1″ ID | H-BMT65-8311M DBL: 25mm Dbl.OD | ||||
| H-BMT65-8435 Split: 1.5″ ID | H-BMT65-8311 DBL-OS: 1″ Offset Dbl. OD | ||||
| H-BMT65-8436 Split: 2″ ID | H-BMT65-8311M DBL-OS: 25mm Offset Dbl.OD | ||||
| H-BMT65-8425M Split: 25mm ID | H-BMT65-8311-4OS: 1″ 4 Pos Offset OD | ||||
| H-BMT65-8435M Split: 40mm ID | H-BMT65-8311M-4OS: 25mm 4 Pos Offset OD | ||||
| H-BMT65-8436M Split: 50mm ID | |||||
| H-BMT65-8432-T : 1-1/4″ Twin ID | |||||
| H-BMT65-8432M-T : 32mm Twin ID | |||||
| H-BMT65-8425 TPL : 1″ Triple ID | |||||
| H-BMT65-8425M TPL : 25mm Triple ID | |||||
| H-BMT65-8425 TPL-T : 1″ Triple Twin ID | |||||
| H-BMT65-8425M TPL-T : 25mm TripleTwin ID | |||||
| Bolt Hole Pattern: 80mm x 45mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| SL20, SL30, ST30, ST31, TL15, TL25 | HSL30-8425 | 1″ | 1.25″ | HSL30-8311 1″ Sq. | HSL30-8411 1″ Sq. |
| HSL30-8432 | 1.25″ | 1.25″ | |||
| HSL30-8435 | 1.5″ | 1.25″ | |||
| HSL30-8445 | 1.75″ | 1.25″ | |||
| HSL30-8436 | 2″ | 1.35″ | |||
| HSL30-8437 | 2.5″ | 1.35″ | |||
| Bolt Hole Pattern: 105mm x 70mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| SL-40 | HSL40-8436 | 2″ | 1.625″ | HLS40-8311B 1.25″ Sq. | HSL40-8411B 1.25″ Sq. |
| HSL40-8437 | 2.5″ | 1.625″ |
Rovi
ID
U-DRILL
SPLIT
FACING
TURNING
| Bolt Hole Pattern: 76mm x 45mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Nexus100/150, QT8, QT150, QT250 | NEX100-8425 | 1″ | 1″ | NEX100-8411 1″ Sq. | |
| NEX100-8432 | 1.25″ | 1.125″ | |||
| NEX100-8435 | 1.50″ | 1.125″ | |||
| Bolt Hole Pattern: 94mm x 60mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Bridgeport QT8, QT15/18, QTN15, SQT250, QT200, Romi M27, NEX150-8D, DualTurn 20 QT, Nexus250 Duplomatic, QT Nexus 200, QT Nexus 350, QT Nexus 300, QT20, QT Nexus 2000 | NEX350-8420 | 0.75″ | 50mm | NEX350-8311 1″ Sq. | NEX350-8411 1″ Sq. |
| NEX350-8425 | 1″ | 50mm | |||
| NEX350-8432 | 1.25″ | 50mm | |||
| NEX350-8435 | 1.50″ | 50mm | |||
| NEX350-8436 | 2″ | 50mm | |||
| NEX350-8437 | 2.50″ | 50mm | |||
| NEX350-8475 | 3″ | 50mm | |||
| Bolt Hole Pattern: 118mm x 88mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| NEXUS 400, NEXUS 450 | NEX450-8435 | 1.50″ | 2″ | NEX450-8311B 1.25″ Sq. | NEX450-8411B 1.25″ Sq. |
| NEX450-8436 | 2″ | 2″ | |||
| NEX450-8437 | 2.5″ | 2″ | |||
| NEX450-8475 | 3″ | 2″ | |||
| Bolt Hole Pattern: 104mm x 57mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| QT25, QT28N, QT30, QT300 | QT30-8435 | 1.5″ | 2.25″ | QT30-8311 1″ Sq. | QT30-8411 1″ Sq. |
| QT30-8436 | 2″ | 2.25″ | |||
| Bolt Hole Pattern: 94mm x 84mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| QT35N, QTN40, QT350 | QT35-8435 | 1.50″ | 2″ | QT35-8311B 1.25″ Sq. | QT35-8411B 1.25″ Sq. |
| QT35-8436 | 2″ | 2″ | |||
| Bolt Hole Pattern: 84mm x 60mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| QT200, QTN250, Smart250, Smart200 | QT200-8432 | 1.25″ | 2″ | QT200-8311 1″ Sq. | QT200-8411 1″ Sq. |
| QT200-8435 | 1.50″ | 2″ | |||
| 6 Hole:BHP 114mm x 203mm ALT. 4 Hole: BHP 114mm x 101mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Slant50, Slant60 | Slant50-8437-4H | 2.5″ | 80mm | Slant50-8311 1.25″ Sq. B-4H | Slant50-8411 1.25″ Sq. B-4H |
| Slant50-8475-4H | 3″ | 80mm | Slant50-8311 1.25″ Sq. B-6H | Slant50-8411 1.25″ Sq. B-6H | |
| Slant50-8437-6H | 2.5″ | 80mm | |||
| Slant50-8475-6H | 3″ | 80mm |
Rovi
ID
FACING
TURNING
| Bolt Hole Pattern: 58mm X 58mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Doosan BMT45, Turret, Lynx 220 | BMT45-8425 | 1″ | 65mm | BMT45-8311A .75″ Sq. | BMT45-8411A .75″ Sq. |
| BMT45-8432 | 1.25″ | 65mm | |||
| Bolt Hole Pattern: 64mm x 64mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Doosan BMT55, Doosan TT18SY, Doosan TT1800Sy, Puma 2000 | BMT55-8432 | 1.25″ | 70mm | BMT55-8311 1″ Sq. | BMT55-8411 1″ Sq. |
| BMT55-8435 | 1.5″ | 70mm | BMT55-8311 DBL 1″ Sq. | ||
| BMT55-8436 | 2″ | 70mm | |||
| Bolt Hole Pattern: 73mm x 70mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Doosan BMT65, Puma 3100, Doosan 2600ms, Doosan TT2500SY, Puma V400, Puma V300M Puma400MB, Puma 300LM | BMT65-8435 | 1.5″ | 100mm | BMT65-8311 1″ Sq. | BMT65-8411 1″ Sq. |
| BMT65-8436 | 2″ | 100mm | BMT65-8311 DBL 1″ Sq. | ||
| Bolt Hole Pattern: 90mm x 90mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Doosan BMT75, Puma V550, Puma 400 | BMT75-8436 | 2″ | 60mm | BMT75-8311 1″ Sq. | BMT75-8411 1″ Sq. |
| BMT75-8437 | 2.5″ | 60mm | BMT75-8311 1.25″ Sq. | BMT75-8411 1.25″ Sq. | |
| BMT75-8475 | 3″ | 60mm | |||
| Bolt Hole Pattern: 72mm x 45mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Puma 200, Puma 240C, With Locator Keyway | Puma200K-8435 | 1.5″ | 40mm | Puma200K-8311 1″ Sq. | Puma200K-8411 1″ Sq. |
| Puma200K-8436 | 2″ | 40mm | |||
| Bolt Hole Pattern: 72mm x 45mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Puma 200, Puma 240C, With Locator Slot | Puma200S-8435 | 1.5″ | 40mm | Puma200S-8311 1″ Sq. | Puma200S-8411 1″ Sq. |
| Puma200S-8436 | 2″ | 40mm | |||
| Bolt Hole Pattern: 80mm x 55mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Puma 300, Puma 250L, Puma 300L, Daewoo 12, With Locator Slot | Puma300S-8435 | 1.5″ | 40mm | Puma300S-8311 1″ Sq. | Puma300S-8411 1″ Sq. |
| Puma300S-8436 | 2″ | 40mm | |||
| Bolt Hole Pattern: 80mm x 55mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| Puma 300, Puma 250L , Puma 300L , Daewoo 12, With Locator Keyway | Puma300K-8435 | 1.5″ | 40mm | Puma300K-8311 1″ Sq. | Puma300K-8411 1″ Sq. |
| Puma300K-8436 | 2″ | 40mm |
Rovi
ID
FACING
TURNING
| Bolt Hole Pattern: 90mm x 70mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| H4 | HB4A-1 1/2 | 1.5″ | 40mm | HO4A-1RL 1″ Sq. | HF4A-1RL 1″ Sq. |
| HB4A-2 | 2″ | 40mm | |||
| Bolt Hole Pattern: 80mm x 50mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| H6 | HB6A-1.50 | 1.5″ | 40mm | HO6A-1RL 1″ Sq. | HF6A-1RL 1″ Sq. |
| HB6A-2 | 2″ | 40mm | HO6B-1RL 1″ Sq. | HF6B-1RL 1″ Sq. | |
| HB6B-1.50 | 1.5″ | 60mm | |||
| HB6B-2 | 2″ | 60mm | |||
| Bolt Hole Pattern: 120mm x 80mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| H8 | HB8-1.50-N | 1.5″ | 155mm | HO8-1L-N 1″ Sq. | HF8-1RL-N 1″ Sq. |
| HB8-1.75-N | 1.75″ | 155mm | HO8-1R-N 1″ Sq. | ||
| Bolt Hole Pattern: 90mm x 70mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| H8A | HB8A-1.75-N | 1.75″ | 120mm | HO8B-1RN-N-W 1″ Sq. | HF8A-1RN-N-W 1″ Sq. |
| HB8A-2-N | 2″ | 120mm | |||
| Bolt Hole Pattern: 95mm x 60mm Machine Model |
Part Number Int. Coolant: Add -INT † Ext. Coolant Only |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| H10 | HB10-1.50-N | 1.5″ | 110mm | HO10-1RL-N-W 1″ Sq. | HF10-1RL-N-W 1″ Sq. |
| HB10-1.75-N | 1.75″ | 110mm | HO10-1.25-N-W 1.25″ Sq. | HF10-1RL-N-W 1.25″ Sq. | |
| HB10-2-N | 2″ | 110mm | |||
| † HB10-2.50-N | 2.5″ | 110mm | |||
| Bolt Hole Pattern: 100mm x 90mm Machine Model |
Part Number Int. Coolant: Add -INT † Ext. Coolant Only |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| *Signifies M16 Bolt H10A |
HB10A-2 | 2″ | 120mm | HO10A-1 1″ Sq. | HF10A-1 1″ Sq. |
| † HB10A-2.5 | 2.5″ | 120mm | HO10A-1.25 1.25″ Sq. | HF10A-1.25 1.25″ Sq. | |
| * HO10B-1 1″ Sq. | * HF10B-1 1″ Sq. | ||||
| * HO10B-1.25 1.25″ Sq. | HF10B-1.25 1.25″ Sq. | ||||
| Bolt Hole Pattern: 75mm x 50mm Machine Model |
Part Number Int. Coolant: Add -INT † Ext. Coolant Only |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| H12 | HB12-1.50-N | 1.5″ | 105mm | HO12-1RL-N-W 1″ Sq. | HF12-1RL-N-W 1″ Sq. |
| HB12-1.75-N | 1.75″ | 105mm | |||
| † HB12-2-N | 2″ | 105mm | |||
| Bolt Hole Pattern: 140mm x 115mm Machine Model |
Part Number † Ext. Coolant Only |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| H22 | † HB22-2-N | 2″ | 128mm | HO22-1RL 1″ Sq. | HF22-1RL 1″ Sq. |
| † HB22-2.50-N | 2.5″ | 128mm | HO22-1.25RL 1.25″ Sq. | HF22-1.25RL 1.25″ Sq. | |
| † HB22-3-N | 3″ | 128mm | |||
| Bolt Hole Pattern: 75mm x 50mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| HB9 | HB9-1.25 | 1.25″ | 130mm | HO9-.75 .75″ Sq. | HF9-.75 .75″ Sq. |
| Bolt Hole Pattern: 80mm x 50mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| HB23 | HB23-1.5 | 1.5″ | 43mm | HO23-1RL 1″ Sq. | HF23-1RL 1″ Sq. |
Rovi
ID
FACING
TURNING
| Bolt Hole Pattern: 60mm x 50mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| TW-10, WTS150, WTW150, SC200, SC250, SUPER NTJ, SUPER NTJX,, SUPER NTM3, TMC15, WT250 | TW10-8425 | 1″ | 75mm | TW10-8311A .750″ Sq. | TW10-8411A .750″ Sq. |
| TW10-8432 | 1.25″ | 75mm | |||
| TW10-8435 | 1.5″ | 75mm | |||
| TW10-8436 | 2″ | 75mm | |||
| Bolt Hole Pattern: 71mm x 69mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| TW20, Super NTX, Super NTXS, SC-300, WT300 | TW20-8435 | 1.5″ | 90mm | TW20-8311 1″ Sq. | TW20-8411 1″ Sq. |
| TW20-8436 | 2″ | 90mm | |||
| Bolt Hole Pattern: 85mm x 70mm Machine Model |
Part Number Int. Coolant: Add -INT |
I.D. | Center Height |
OD Turning Type I | OD Facing Type II |
| TW30, SC-450 | TW30-8435 | 1.5″ | 105mm | TW30-8311 1″ Sq. | TW30-8411 1″ Sq. |
| TW30-8436 | 2″ | 105mm |
Rovi
ID
FACING
TURNING
- Part Number Code: First List Part Number Prefix – Style.
- For Example: Okuma L470 2″
- ID Tool Block = Part Number L470-8436 2″
- For Internal Coolant; add INT to end of Part Number: L470-8436 2″ INT
| Machine, Make | Bolt Hole, Machine Model | Part Number, Pattern | ID Tool, Prefix | ID Tool, Block | Block | FACING, U-Drill | TURNING, HOLDER | HOLDER |
| Ameri Seiki | Machine | 80mm X 45mm | Amer.80×45- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Biglia | Machine | 65mm X 63mm | BIGLIA.65×63- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Chevalier | FCL820 | 68mm X 42mm | CHEV.68×42- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Cincinnati | Falcon | 70mm X 48mm | CINFAL.70×48- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Cincinnati | Hawk 150 | Triangular | Specific | 65009277 | 1-1/4″ ID” | -INT | 65009275 | |
| Cincinnati | Hawk 200&250 | Triangular | Specific | 65009282 | 1-1/2″ ID” | -INT | 65009280 | |
| Dainichi | F200 & F250 & F25 | 85mm X40mm | DN F200.85×40- | -8425 1″ | -8435 1-1/2″ | -INT | -8411 | -8311 |
| Dainichi | F20 | 61mm X40mm | DN F20.61×40- | -8425 1″ | -8435 1-1/2″ | -INT | -8411 | -8311 |
| Dainichi | M95 | 130mm X 90mm | DN M95.130×90- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Dainichi | V12/10 Turret | 85mm X 40mm | DN V12.84×40- | -8425 1″ | -8435 1-1/2″ | -INT | -8411 | -8311 |
| DMG | CTX620 | 90mm x 57mm | CTX620.90×70- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Doosan | BMT85 | 100mm x 100mm | BMT85.100×100- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Dorian | SmartDex 20N | 46mm X45mm | SmartDex20N.46×45- | -8425 1″ | -8435 1-1/2″ | -INT | -8411 | -8311 |
| Dorian | SmartDex 25N | 64mm X46mm | SmartDexSD25N.64×46- | -8425 1″ | -8435 1-1/2″ | -INT | -8411 | -8311 |
| Duplomatic | Hi-Tech | 94mm x 60mm | HS TF25.94×60- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Hankook | Protech9NB | 115mm x 80mm | PRO9NB.115×80- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Hitachi Seiki | TF25 | 75mm x 40mm | HS TF25.75×40- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Hitachi Seiki | HT25G | 88mm x 52mm | HS HT25G.88×52- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Hurco | TM10 | 80mm x 45mm | HURCO.80×45- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Hwacheon | 5V | 100mm x 63mm | HWA 5V.100×63- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Hwacheon | 21HS | 74mm x 30mm | HWA 21HS.74×30- | -8432 1-1/4″ | -8435 1-1/2″ | -INT | -8411 | -8311 |
| Hwacheon | Hi-Echo 3xAA | 80mm x 50mm | HWA 3xAA.80×50- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Hwacheon | Hi-Tech 550A | 90mm x 42mm | HWA 550A.90×42- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Hyundai | HIT 18 | 90mm x 42mm | HIT 18.90×42- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Ikegai | TU30 | 80mm x 110mm | IK TU30.80×110- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Kia | SKT21 | 75mm x 40mm | KIA SKT21.75×40- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Kia | 28L | 86mm x 55mm | KIA 28L.86×55- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Kia | SKT400 | 90mm x 42mm | KIA SKT400.90×42- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Kia | SKT1521 & 15 | 75mm x 40mm | KIA SKT1521.75×40- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Leadwell | LTC25 | 86mm x 55mm | LD LTC25.86×55- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Leadwell | LTC50XXL | 110mm x 70mm | LD LCT50.110×70- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Mitee | Machine | 76mm x 35mm | MITEE.76×35- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Miyano | LE II | 80mm x 54mm | MIY LE11.80×45- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Miyano | TS60C | 106mm x 92mm | MIY TS60C.106×92- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Murata | MW200 | 110mm x 76mm | MUR MW200.110×76- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Pragati | BTP 1/2 | 40mm x 20mm | PRAG 1/2.40×20- | -8420 3/4″ | -8425 1″ | -INT | -8411 | -8311 |
| Pragati | BTP 5/8 | 48mm x 24mm | PRAG 5/8.48×24- | -8420 3/4″ | -8425 1″ | -INT | -8411 | -8311 |
| Pragati | BTP 3/4 | 58mm x 32mm | PRAG 3/4.58×32- | -8425 1″ | -8432 1-1/4″ | -INT | -8411 | -8311 |
| Pragati | BTP 1 | 72mm x 36mm | PRAG 1.72×36- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Pragati | BTP 1-1/4 | 90mm x 70mm | PRAG 1-1/4.90×70- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Pragati | BTP 1-1/2 | 116mm x 70mm | PRAG 1-1/2.116×70- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Sharpe | MW200 | 54mm x 35mm | SHRP ST10.54×35- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| SNK | SUT12 | 80mm x 50mm | SNK.80×50- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| STAR | STAR | 60mm x 50mm | STAR.60×50- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Takizawa | TZ20 | 70mm x 50mm | TAK TZ20.70×50- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Takamazu | XY180 | 72mm x 50mm | TAKAMAZ.72×50- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Tornos | TornosI | 100mm x 85mm | TORNOS I.100×85- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Tornos | TornosII | 100mm x 85mm | TORNOS II.100×85- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Viper | VT20 | 76mm x 35mm | VIP VT20.76×35- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Wasino | LJ103M | 96mm x 96mm | WAS LJ103.96×96- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Wasino | LJ6 | 96mm x 96mm | WAS LJ6.96×96- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
| Wasino | LU5 & CL | 60mm x 30mm | WAS LU5.50×30- | -8435 1-1/2″ | -8436 2″ | -INT | -8411 | -8311 |
Rovi
More Tool Blocks – All Machine Makes & Models!
Add To Cart
Out of stock
Product Images
Move your mouse over image for zoom or click to see larger view.
