Royal Quick-Grip Emergency Collets
Occasionally, customers express interest in using S-type collet pads to grip their parts. Although this outdated technology is typically not the best
choice for most workholding applications, S-type collet pads can be utilized with Royal Quick-Grip™ CNC Collet Chucks via our Quick-Grip™ S-Type Master Collets. These master collets are available for Royal QG-65 and QG-80 chuck models, and are capable of accepting S-20, S-26, and S-30 collet pads.
- Semi-hard Quick-Grip™ emergency collets are designed to be machined in-place by the user to accommodate special sizes, shapes, steps, etc.
- Available in assorted pilot hole sizes to minimize machining time.
- Collets can be counter-bored beyond standard capacity, eliminating the need for a three-jaw chuck on many jobs. The chart below provides some basic counter-bore guidelines, but many other diameter/depth combinations are possible. Please contact Royal for additional information.
- Boring fixture holds collet segments firmly in-place and puts collet under slight compression to ensure accuracy and roundness during machining. Order fixture separately.
Filters Sort results
Reset Apply
Pilot Hole Size | Price | Part # | Add To Cart | |
|---|---|---|---|---|
5mm (0.20″) | $366.00 | |||
15mm (0.59″) | $366.00 | |||
8mm (0.31″) | $411.00 | |||
20mm (0.79″) | $411.00 | |||
30mm (1.18″) | $411.00 | |||
8mm (0.31″) | $620.00 | |||
20mm (0.79″) | $620.00 | |||
40mm (1.57″) | $620.00 | |||
30mm (1.18″) | $1,019.00 | |||
45mm (1.77″) | $1,019.00 | |||
65mm (2.56″) | $1,019.00 |
