Product Description
- Adjusts from full shutoff to fine fan spray to direct stream
- Aimable from zero to 90° with 360° sweep
- Stays put (doesn’t vibrate out of place)
- No interference problems with clamps, fixtures or swarf
- Fits NPT and BSPT threads
- Rated to 100 psi (6.7 bar) maximum
MillJets shown in use at various angles and spray widths.
Dimensions In Inches
Part No. | Thread Size “E” | B | C | D (Degrees) | A | F | Pkg Qty |
MJ03010 | 1/8 NPT/BSPT | 1.50 | 1.70 | 0-90 | 0.44 | 0.625 | 2 |
MJ00117 | 1/4 NPT/BSPT | 1.50 | 1.70 | 0-90 | 0.44 | 0.625 | 2 |
– Recommended coolant filtration – 100 microns –
- Material: Acetal
- Maximum Pressure: 100 PSI (6.7 bar)
- Max Operating Temperature: 160°F (70°C)
MillJets shown installed on Vertical Machining
Center showing wide and narrow spray.
WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE OR OBLIGATION.
Select Part No., Input Quantity (2 per pkg.) and Add To Cart