Royal Quick-Grip Emergency Collets
Occasionally, customers express interest in using S-type collet pads to grip their parts. Although this outdated technology is typically not the best choice for most workholding applications, S-type collet pads can be utilized with Royal Quick-Grip™ CNC Collet Chucks via our Quick-Grip™ S-Type Master Collets. These master collets are available for Royal QG-65 and QG-80 chuck models, and are capable of accepting S-20, S-26, and S-30 collet pads.
- Semi-hard Quick-Grip™ emergency collets are designed to be machined in-place by the user to accommodate special sizes, shapes, steps, etc.
- Available in assorted pilot hole sizes to minimize machining time.
- Collets can be counter-bored beyond standard capacity, eliminating the need for a three-jaw chuck on many jobs. The chart below provides some basic counter-bore guidelines, but many other diameter/depth combinations are possible. Please contact Royal for additional information.
- Boring fixture holds collet segments firmly in-place and puts collet under slight compression to ensure accuracy and roundness during machining. Order fixture separately.
Filters Sort results
Reset Apply
Pilot Hole Size | Price | Part # | Add To Cart | |
|---|---|---|---|---|
| 5mm (0.20″) | $425.00 | | ||
| 15mm (0.59″) | $425.00 | | ||
| 8mm (0.31″) | $477.00 | | ||
| 20mm (0.79″) | $477.00 | | ||
| 30mm (1.18″) | $477.00 | | ||
| 8mm (0.31″) | $720.00 | | ||
| 20mm (0.79″) | $720.00 | | ||
| 40mm (1.57″) | $720.00 | | ||
| 30mm (1.18″) | $1,190.00 | | ||
| 45mm (1.77″) | $1,190.00 | | ||
| 65mm (2.56″) | $1,190.00 | | ||
| 5mm (0.20″) | $425.00 | |
